Free · 2026 · Printable, no sign-up Free ABA data sheets: ABC data sheet, frequency, interval, DTT and more, ready to print

An ABA data sheet is a form you fill in during an applied behavior analysis session to record behavior as it happens, so the supervising BCBA can see in numbers whether a plan is working. The main types are the ABC data sheet (antecedent, behavior, consequence) for descriptive assessment; frequency, duration and latency sheets for continuous measurement; partial interval, whole interval and momentary time sampling grids for discontinuous measurement; and DTT, task analysis and MSWO preference assessment sheets for teaching and assessment. Every sheet here is free, printable and editable, with no sign-up: pick a type, fill in the learner's initials, the behavior and the session settings, then print it or save it as a PDF. A filled-in sample shows how to score each sheet and do the summary math. On the RBT Test Content Outline (3rd edition), these sheets cover measurement tasks A.1 and A.2, summarizing data (A.6), ABC recording in functional assessment (B.3), preference assessments (B.1), discrete-trial teaching (C.3) and task analysis (C.5). Below the maker, each sheet type has a short facts block: what it measures, how to fill it in, the formula, a worked example and the common mistake.

Studying for the RBT exam? Take the free 10-question RBT check It scores you in each content area, including Data Collection and Graphing, with no sign-up.

ABA data sheet maker

1. Choose a sheet type
2. Set the fields (leave any blank to write it by hand)

3. Preview, then print or save as PDF

To save a PDF, pick “Save as PDF” as the printer. Only the sheet prints, on US letter paper, in black and white. What you type stays in this browser.

ABC Data Sheet

Free from quizprep.co/aba-data-sheets
Learner (initials)DateObserver
SettingSession lengthStart / end time
Behavior
Operational definition
CodesWrite what you saw and heard. No guesses about feelings.
TimeAntecedent (right before)Behavior (what the learner did)Consequence (right after)Possible function*

Total episodes:   Episodes after a demand:   of  

Pattern to share with your supervisor:  

*For your supervisor to review. ABC data shows what goes together, not what causes the behavior.

Initials only, no full names. Record data live, as your plan says. Notes: ____________________________________________

Scroll sideways inside the preview to see the whole sheet.

Will you be scored on this? Data collection is a whole content area of the RBT exam. Try free Data Collection and Graphing questions.

The facts · checked November 18, 2026

Each ABA data sheet, explained

Your supervising BCBA chooses the measure, the interval length and the codes, and writes them into the plan; the RBT records the data live, as written. Task codes below are from the BACB RBT Test Content Outline, 3rd edition, and link to that task in our RBT study guide.

Which data sheet for which job
SheetMeasuresSummaryRBT task
ABCWhat happens right before a behavior (the antecedent), the behavior itself, and what happens right after it (the consequence)No single formula. Count patterns: episodes after a demand ÷ all episodes × 100.A.5, B.3
FrequencyHow many times a behavior happensRate = count ÷ minutes observed.A.1, A.6
DurationHow long each episode of a behavior lasts, from when it starts to when it endsMean duration = total duration ÷ number of episodes. Percent of session = total duration ÷ session length × 100.A.1, A.6
LatencyHow long it takes the learner to start responding after an instruction or cue (the SD)Mean latency = total latency ÷ number of trials.A.1
Partial intervalWhether a behavior happened at any point in each intervalPercent of intervals = intervals scored + ÷ total intervals × 100.A.2, A.6
Whole intervalWhether a behavior lasted for the entire interval, without a breakPercent of intervals = intervals scored + ÷ total intervals × 100.A.2, A.6
Momentary time samplingWhether a behavior is happening at the moment each interval endsPercent of intervals = intervals scored + ÷ total intervals × 100.A.2, A.6
DTTThe learner's response on each teaching trial for each target: correct on their own, incorrect, or promptedPercent correct = correct trials ÷ total trials × 100.C.3, A.6
Task analysisHow much help the learner needed on each step of a skill broken into small steps, such as handwashing or getting dressedPercent independent = steps scored I ÷ total steps × 100.C.5, A.6
MSWOThe order a learner chooses items from an array, to rank them from most to least preferredThis sheet: total = sum of the item's pick numbers; lowest total = rank 1.B.1

ABC data sheet

What it measures:
What happens right before a behavior (the antecedent), the behavior itself, and what happens right after it (the consequence). It is narrative: you write short sentences, not numbers.
When to use it:
In a descriptive assessment, when the supervisor wants to see what tends to set off a behavior and what follows it, so they can form a guess about its function.
How to fill it in:
Write each episode as soon as it happens, with the time. Describe only what you could see or hear: the instruction given, who was there, what the learner did, what people did next. If your sheet has a possible-function column, leave it for your supervisor or fill it only as they direct.
Formula:
No single formula. Count patterns: episodes after a demand ÷ all episodes × 100.
Worked example:
3 of 4 episodes came right after a work demand (75%), and 2 of those ended with the task removed. That pattern suggests a possible escape function for the supervisor to check.

Common mistake: Writing guesses or labels ("he was frustrated", "she wanted attention") instead of what happened. ABC data shows what goes together, not what causes the behavior.

On the RBT exam: task A.5, Observable and measurable terms · task B.3, Functional assessment components

Frequency (event recording) data sheet

What it measures:
How many times a behavior happens. Divided by the observation time, the count becomes a rate.
When to use it:
For behaviors with a clear start and end that don't last long, such as hitting, hand raising, requests or swearing.
How to fill it in:
Make one tally mark each time the behavior happens, in the row for that time block. At the end, add the tallies and write the minutes you actually observed.
Formula:
Rate = count ÷ minutes observed.
Worked example:
18 hand raises in a 30-minute session is 18 ÷ 30 = 0.6 per minute (36 per hour).

Common mistake: Comparing raw counts from sessions of different lengths. 10 in 20 minutes (0.5 per minute) is a higher rate than 15 in 60 minutes (0.25 per minute).

On the RBT exam: task A.1, Continuous measurement · task A.6, Calculate and summarize data

Duration data sheet

What it measures:
How long each episode of a behavior lasts, from when it starts to when it ends.
When to use it:
For behaviors where how long matters more than how often: tantrums, on-task time, play, time out of seat.
How to fill it in:
Write the start time when the behavior begins and the end time when it stops, using the start and end rules in the definition. Work out each episode's duration, then the total and the mean.
Formula:
Mean duration = total duration ÷ number of episodes. Percent of session = total duration ÷ session length × 100.
Worked example:
Tantrums of 4, 6 and 11 minutes: total 21 minutes, mean 21 ÷ 3 = 7 minutes, and 21 of a 60-minute session is 35%.

Common mistake: No clear start and end rule. Without one ("ends after 10 seconds of calm"), two observers time the same tantrum differently.

On the RBT exam: task A.1, Continuous measurement · task A.6, Calculate and summarize data

Latency data sheet

What it measures:
How long it takes the learner to start responding after an instruction or cue (the SD).
When to use it:
For slow starts and compliance: how long after "Line up" or "Put your shoes on" the learner gets going.
How to fill it in:
Start timing when the instruction (SD) is given, at the point your plan defines, and stop the moment the response starts, not when it is finished. Write one row per instruction.
Formula:
Mean latency = total latency ÷ number of trials.
Worked example:
Latencies of 40, 15, 25 and 20 seconds: total 100, mean 100 ÷ 4 = 25 seconds.

Common mistake: Starting the clock at the end of the previous response (that is interresponse time, IRT) or stopping it when the task is done (that adds duration). Latency runs from the SD to the start of the response.

On the RBT exam: task A.1, Continuous measurement

Partial interval data sheet

What it measures:
Whether a behavior happened at any point in each interval. It samples the behavior, so the result is an estimate.
When to use it:
For behaviors you want to decrease, and brief, fast behaviors that are hard to count, such as calling out or hand flapping.
How to fill it in:
Run a timer. In each interval, score + as soon as the behavior happens once; more instances in the same interval don't change it. Score − if it never happens in that interval.
Formula:
Percent of intervals = intervals scored + ÷ total intervals × 100.
Worked example:
7 of 20 intervals scored + is 7 ÷ 20 × 100 = 35%.

Common mistake: Treating it as a count, or forgetting its bias: one brief instance scores the whole interval, so partial interval tends to overestimate how much of the time the behavior happens.

On the RBT exam: task A.2, Discontinuous measurement · task A.6, Calculate and summarize data

Whole interval data sheet

What it measures:
Whether a behavior lasted for the entire interval, without a break.
When to use it:
For behaviors you want to increase that should keep going, such as on-task, engagement or cooperative play.
How to fill it in:
Watch the whole interval. Score + only if the behavior ran from the start of the interval to its end. Any gap, even a short one, makes it −.
Formula:
Percent of intervals = intervals scored + ÷ total intervals × 100.
Worked example:
On-task for the full interval in 13 of 20 intervals is 13 ÷ 20 × 100 = 65%.

Common mistake: Scoring + when the behavior stopped for a moment. Whole interval tends to underestimate: a learner on task 9 of 10 seconds still scores −.

On the RBT exam: task A.2, Discontinuous measurement · task A.6, Calculate and summarize data

Momentary time sampling data sheet

What it measures:
Whether a behavior is happening at the moment each interval ends. Only that moment counts.
When to use it:
For behaviors that last a while (in seat, engaged, stereotypy) and when you are watching a group or teaching at the same time.
How to fill it in:
Use a timer or vibrating alarm. When an interval ends, look up and score + if the behavior is happening right then, − if not. Ignore what happened earlier in the interval.
Formula:
Percent of intervals = intervals scored + ÷ total intervals × 100.
Worked example:
In seat at 11 of 20 checks is 11 ÷ 20 × 100 = 55%.

Common mistake: Scoring + because the behavior happened earlier in the interval. MTS can overestimate or underestimate, and brief behaviors between checks are missed.

On the RBT exam: task A.2, Discontinuous measurement · task A.6, Calculate and summarize data

DTT (discrete trial) data sheet

What it measures:
The learner's response on each teaching trial for each target: correct on their own, incorrect, or prompted.
When to use it:
During discrete-trial teaching: short, adult-led trials with an instruction (SD), a prompt if needed, the response, a consequence and a short pause.
How to fill it in:
Mark each trial right after the learner responds, using the codes in the legend. Don't wait until the end of the session. At the end, count the correct trials for each target.
Formula:
Percent correct = correct trials ÷ total trials × 100.
Worked example:
"Touch dog": 8 independent correct of 10 trials = 80%. Prompted trials are not counted as correct here.

Common mistake: Counting prompted responses as correct when the plan scores only independent ones, or filling in trials from memory after the session.

On the RBT exam: task C.3, Discrete-trial teaching · task A.6, Calculate and summarize data

Task analysis data sheet

What it measures:
How much help the learner needed on each step of a skill broken into small steps, such as handwashing or getting dressed.
When to use it:
When teaching a chain of behaviors with forward, backward or total-task chaining.
How to fill it in:
For each step, write the code for the most help you gave (I if none). Use the prompt codes in the legend, from full physical (most help) to verbal. Each column is one session.
Formula:
Percent independent = steps scored I ÷ total steps × 100.
Worked example:
Handwashing, session 3: 5 of 7 steps done independently = 71%.

Common mistake: Scoring a step I when any prompt was given, or recording the first prompt instead of the most help needed on that step.

On the RBT exam: task C.5, Task-analyzed chaining · task A.6, Calculate and summarize data

MSWO preference assessment data sheet

What it measures:
The order a learner chooses items from an array, to rank them from most to least preferred.
When to use it:
Before teaching, to find items to try as reinforcers. It is quick and gives a ranked list.
How to fill it in:
Put the items in a row and say "Pick one." Let the learner have the chosen item briefly, then remove it: it isn't put back. Move the remaining items around and repeat until every item is chosen or the learner stops choosing. Each full run is one round; write the pick order (1 = first).
Formula:
This sheet: total = sum of the item's pick numbers; lowest total = rank 1.
Worked example:
Bubbles picked 1st, 1st and 2nd over 3 rounds: total 4, the lowest of the 5 items, so bubbles rank 1.

Common mistake: Putting the chosen item back (that is MSW, multiple stimulus with replacement) or reading a top preference as proof it works as a reinforcer. A reinforcer assessment checks that.

On the RBT exam: task B.1, Preference assessments

Permanent product recording (task A.3) needs no live sheet: you score what the behavior left behind, such as a finished worksheet, after the session.

Checking data with a second observer? Record the session on two copies of the same sheet, then compare them with the IOA calculator.

Data Collection and Graphing is 13 of 75 scored RBT questions

It's area A of the RBT exam: which measure fits a behavior, how an interval is scored, and what a rate or percentage works out to. Try free questions from that area, or take the 10-question RBT check for a score in every area, in about three minutes, with no sign-up.

ABA data sheets FAQ

What is an ABA data sheet?

An ABA data sheet is a form used during an applied behavior analysis session to record behavior as it happens: how often, how long, in which intervals, or how a learner responded on each teaching trial. The supervising BCBA reads the numbers to decide whether a plan is working. Common types are ABC, frequency, duration, latency, interval recording, DTT, task analysis and preference assessment sheets.

What is an ABC data sheet?

An ABC data sheet records each episode of a behavior with what happened right before it (the antecedent), the behavior itself, and what happened right after it (the consequence), in plain observable words. It is used in descriptive assessment to spot patterns, such as a behavior that usually follows a demand and ends with the task removed, which the supervisor uses to form a guess about the behavior's function.

Which ABA data sheet should I use?

The one your supervising BCBA writes into the plan. As a rule of thumb: frequency for brief behaviors with a clear start and end, duration for behaviors where how long matters, latency for slow starts after an instruction, partial interval for behaviors to decrease, whole interval for behaviors to increase, momentary time sampling for long-lasting behaviors or groups, DTT and task analysis sheets for teaching, and an MSWO sheet for preference assessments.

How do you calculate the percentage of intervals?

Divide the intervals scored + by the total number of intervals and multiply by 100. For example, 7 of 20 intervals scored is 7 ÷ 20 × 100 = 35%. The interval sheets here add up each row and print the formula at the bottom.

What is the difference between frequency and rate?

Frequency is the count of how many times a behavior happened. Rate is the count divided by the observation time, such as 18 hand raises in 30 minutes = 0.6 per minute. Use rate to compare sessions of different lengths.

Is it safe to put client information on these sheets?

Use the learner's initials only, never a full name, and follow your agency's rules for paper data. What you type into this maker stays in your browser: it is not sent to QuizPrep, and the last settings are remembered on this device only. Clear the fields on a shared computer.

Can I edit the data sheets before printing?

Yes. Every header field, the number of rows, intervals, trials, steps, sessions or items, the target list and the codes legend can be changed, and the preview updates as you type. Leave any field blank to write it in by hand.

What does MSWO stand for?

Multiple stimulus without replacement: a preference assessment where the learner picks one item from an array, the chosen item is not put back, and the learner picks again from the rest. The pick order gives a ranked list of preferred items. In MSW (with replacement) the chosen item goes back in the array.

More free RBT practice

85-question RBT mock exam, interval recording trainer, functions of behavior, prompt hierarchy, chaining and task analysis and the RBT study guide.

Sources, checked November 18, 2026: BACB: RBT Test Content Outline (3rd ed.) · Cooper, Heron & Heward: Applied Behavior Analysis (3rd ed., 2020) · DeLeon & Iwata (1996): Evaluation of a multiple-stimulus presentation format for assessing reinforcer preferences, JABA · Powell, Martindale & Kulp (1975): An evaluation of time-sample measures of behavior, JABA. For data collection practice and exam study, not clinical guidance: your supervising BCBA chooses the measures and codes for each learner. QuizPrep is an independent study tool, not affiliated with or endorsed by the BACB.