Free · 2026 · 3rd edition Test Content Outline RBT study guide: the 3rd edition task list in plain words

This free RBT study guide covers all 43 tasks on the BACB's RBT Test Content Outline, 3rd edition, the task list every RBT exam has used since January 1, 2026. The exam is 85 multiple-choice questions in 90 minutes, and its 75 scored questions are spread over 6 content areas: Data Collection and Graphing (13), Behavior Assessment (8), Behavior Acquisition (19), Behavior Reduction (14), Documentation and Reporting (10), Ethics (11). Each task below is explained in plain words, with one example from a real-looking session and the mix-up the exam tends to test. If your study guide was written before 2026, it follows the 2nd edition task list of 37 tasks, which used different area names and leaves out several tasks that are on the exam now. The areas are in the outline's order, and each one ends with free practice questions for that area. Start with the area you're weakest in, not with A.1.

Not sure where to start? Take the free 10-question RBT check It scores you in each of the 6 areas below and names your weakest, so you know which part of this guide to read first.

Official outline · checked November 16, 2026

The 6 RBT content areas

Source: BACB RBT Test Content Outline, 3rd edition. Exam length and timing: the RBT Handbook. Task titles are short versions of the BACB's wording; the explanations, examples and traps are ours.

What changed from the 2nd edition

2nd edition (before 2026)3rd edition (2026)What changed
A. Measurement (6 tasks)A. Data Collection and Graphing (8 tasks)Adds calculating and summarizing data (A.6), reading trends in graphs (A.7) and the risks of unreliable data and poor procedural fidelity (A.8). Latency and interresponse time are now named under continuous measurement, and "prepare for data collection" is no longer its own task.
B. Assessment (3 tasks)B. Behavior Assessment (3 tasks)Same three topics, but "assist with" became "participate in," and the outline now names the preference assessment types (multiple stimulus, paired stimulus, free operant) and the functional assessment parts (descriptive assessment, functional analysis).
C. Skill Acquisition (12 tasks)C. Behavior Acquisition (11 tasks)The tasks on identifying the parts of the written skill acquisition plan and preparing for the session are gone. Stimulus control transfer is no longer its own task; prompt fading, which transfers stimulus control, is part of C.7, which covers stimulus and response prompts and their fading. Generalization and maintenance are split: C.8 is generalization, and C.9 asks you to tell maintenance from acquisition. Reinforcement now names positive and negative reinforcement and its dimensions (C.1), and conditioned reinforcers get their own task (C.2).
D. Behavior Reduction (6 tasks)D. Behavior Reduction (7 tasks)Adds positive and negative punishment (D.5) and the side effects of extinction and punishment (D.6). Antecedent interventions now name NCR, high-probability request sequences and demand fading, and differential reinforcement adds DRI, DRL and FCT to DRA and DRO. The task on the written behavior reduction plan is gone.
E. Documentation and Reporting (5 tasks)E. Documentation and Reporting (4 tasks)Same name. The 2nd edition task on legal and workplace rules for collecting, storing and transporting data has no Documentation task in the 3rd edition; the closest new task is Ethics F.5 (handling and protecting confidential information).
F. Professional Conduct and Scope of Practice (5 tasks)F. Ethics (10 tasks)Grows from 5 to 10 tasks, built around the RBT Ethics Code (2.0). Supervision requirements (F.3), responding to feedback (F.9), client dignity (F.1) and dual relationships and social media (F.6, F.7) were already in the 2nd edition. New to the outline are the Ethics Code's core principles (F.1), competence (F.2), effective supervision practices (F.4), confidentiality (F.5), the gift rule (F.8) and cultural humility (F.10).

Our side-by-side reading of the 2nd edition RBT Task List and the 3rd edition Test Content Outline.

Area A · 8 tasks · 13 scored questions

A. Data Collection and Graphing

How you measure behavior and turn what you see into numbers and graphs your supervisor can use. Questions usually give a short scenario and ask which measurement fits, what a number works out to, or what a graph shows.

Printable sheets for these measures: free ABA data sheets (ABC, frequency, duration, latency, interval, DTT and more). To check data with a second observer (task A.8), use the IOA calculator.

  • A.1Implement continuous measurement procedures (e.g., frequency, duration, latency, interresponse time)

    Continuous measurement records every instance of the behavior during the observation. Frequency is a count, duration is how long the behavior lasts, latency is the time from the instruction to the start of the response, and interresponse time (IRT) is the time from the end of one response to the start of the next.

    Example: The RBT says "Line up," starts a stopwatch, and stops it when Jordan starts walking to the door: a latency of 40 seconds.

    Exam trap: Latency starts at the instruction, while IRT starts when the previous response ends; swapping these two starting points is the classic wrong answer.

    Learn it with our free interactive page

  • A.2Implement discontinuous measurement procedures (e.g., partial & whole interval, momentary time sampling)

    Discontinuous methods split the session into intervals and record only a sample, so the result is an estimate, reported as a percentage of intervals. Partial interval scores an interval if the behavior happens at any point in it, whole interval only if it lasts the entire interval, and momentary time sampling only if it is happening at the moment the interval ends.

    Example: Using 10-second partial interval recording, the RBT marks every interval in which Leo hums at any point; 12 of 30 intervals marked is 40%.

    Exam trap: Partial interval tends to overestimate how much of the time the behavior happens and whole interval tends to underestimate it (momentary time sampling can go either way), and students often swap the first two.

    Learn it with our free interactive page

  • A.3Implement permanent product recording procedures

    Permanent product recording measures the lasting result a behavior leaves behind, after the behavior is over. You don't have to watch the behavior happen, so it only works for behaviors that leave something you can count or check.

    Example: After independent work time, the RBT checks Ava's worksheet and records 12 of 15 math problems completed correctly.

    Exam trap: Because nobody watched the behavior, you can't be sure the learner made the product alone; a sibling could have finished the worksheet.

  • A.4Enter data and update graphs

    Move session data to the data sheet or app accurately and as soon as possible, and add the new points to the graph the way your supervisor set it up. Most ABA graphs are line graphs with sessions or dates along the bottom and the measure (count, rate, percent) up the side.

    Example: At the end of the session the RBT enters 8 of 10 correct for the "labels colors" target and adds 80% to the graph, on the intervention side of the phase change line.

    Exam trap: Data points are not connected across a phase change line, such as the line between baseline and intervention.

  • A.5Describe behavior and environment in observable and measurable terms

    Write what a person would actually see or hear, specific enough that two observers would record the same thing. Describe the setting and the events before and after the behavior the same way, without guessing at feelings or intentions.

    Example: Instead of "Sam got aggressive at snack," the RBT writes "Sam hit a peer on the arm with an open hand twice during snack, right after the crackers were put away."

    Exam trap: Words like frustrated, angry, bored or noncompliant are labels or guesses, not observable behavior.

    Learn it with our free interactive page

  • A.6Calculate and summarize data in different ways (e.g., rate, mean duration, percentage)

    Turn raw data into a summary number. Rate is the count divided by the observation time, mean duration is the total time divided by the number of episodes, and a percentage is the part divided by the total, times 100.

    Example: Three tantrums lasted 4, 6 and 11 minutes, so the mean duration is 21 divided by 3, or 7 minutes; 18 hand raises in a 30-minute session is a rate of 0.6 per minute.

    Exam trap: When sessions are different lengths, compare rates, not raw counts: 10 responses in 20 minutes is a higher rate than 15 in 60 minutes.

    Learn it with our free interactive page

  • A.7Identify trends in graphed data

    A trend is the direction the data points move over time: increasing, decreasing, or flat (zero trend: the data stay at about the same level). Very variable data can also show no clear trend at all. Also look at level (where the data sit on the graph) and variability (how much they bounce from point to point).

    Example: Correct responses go 30%, 40%, 55%, 60% and 75% over five sessions: an increasing trend, which is good news for a skill being taught.

    Exam trap: Whether a trend is good depends on the goal: a rising trend is good for a skill and bad for a problem behavior.

  • A.8Describe the risks associated with unreliable data collection and poor procedural fidelity

    Procedural fidelity (also called treatment integrity) means running the plan exactly as written. If the data are wrong or the plan isn't run as written, the supervisor can't tell whether the plan works, and may stop a program that works, keep one that doesn't, or make changes the learner doesn't need. Supervisors check data with interobserver agreement (IOA): a second observer records at the same time, and the two records are compared. Low agreement means the data can't be trusted yet.

    Example: The plan says to give the toy after every third request, but the RBT gives it after every request. The graph shows fast progress, yet the BCBA is judging a procedure that isn't the one in the plan.

    Exam trap: Never estimate or fill in data you didn't record; report missed or doubtful data to your supervisor instead.

Test this area: try free Data Collection and Graphing questions, or take the 10-question check to see how you do across all 6 areas.

Area B · 3 tasks · 8 scored questions

B. Behavior Assessment

Your part in the assessments the supervisor uses to plan treatment: finding what the learner prefers, measuring skills, and helping work out why a behavior happens. The RBT collects the data; the supervisor picks the tools and interprets the results.

  • B.1Conduct preference assessments (e.g., multiple stimulus, paired stimulus, free operant)

    A preference assessment finds which items or activities a learner likes most, so they can be tried as reinforcers. In a free operant assessment the learner moves freely among items and you record time spent with each; in paired stimulus you offer two items at a time; in multiple stimulus you offer an array of items at once.

    Example: In an MSWO, the RBT puts five toys on the table, the learner picks the bubbles, the bubbles are not put back, and the learner picks again from the four left, which gives a ranked list.

    Exam trap: MSWO (without replacement) removes the chosen item each round, while MSW (with replacement) puts it back, so the same favorite can be picked again and again.

  • B.2Participate in assessments of relevant skill strengths and deficits

    Skill assessments (curriculum-based, developmental, social skills) measure what the learner can already do and what they still need to learn, in areas like language, play, self-care and social skills. The RBT may present items and record responses exactly as instructed; the supervisor chooses the assessment, interprets the results and writes the goals.

    Example: The BCBA asks the RBT to probe whether Eli can name 10 common objects from his curriculum assessment, and the RBT records each answer without prompting or teaching.

    Exam trap: During an assessment, don't prompt or reinforce correct answers unless the instructions say to, because that measures your help, not the learner's skill.

  • B.3Participate in components of functional assessment procedures (e.g., descriptive assessment, functional analysis)

    Functional assessment finds out why a problem behavior happens. Indirect methods ask people (interviews, rating scales); descriptive assessment watches the behavior where it naturally happens and records what comes before and after it (ABC data); a functional analysis deliberately sets up test conditions, such as attention, demand and alone, to see which one keeps the behavior going.

    Example: During a descriptive assessment the RBT writes: A, teacher says "clean up"; B, Noah throws the blocks; C, the teacher finishes cleaning up for him.

    Exam trap: Descriptive assessment observes without changing anything, a functional analysis changes the conditions on purpose, and interviews or checklists are indirect, not descriptive.

    Learn it with our free interactive page

Test this area: try free Behavior Assessment questions, or take the 10-question check to see how you do across all 6 areas.

Area C · 11 tasks · 19 scored questions

C. Behavior Acquisition

The largest area: the procedures you use to teach new skills, from delivering reinforcement to discrete trials, prompting, chaining and token boards. Questions usually describe a teaching moment and ask you to name the procedure or pick the correct next step.

  • C.1Implement positive and negative reinforcement procedures

    Reinforcement is any consequence that makes a behavior more likely in the future. Positive reinforcement adds something after the behavior; negative reinforcement removes or ends something unpleasant after the behavior; both increase behavior. It works best delivered immediately, only after the target behavior, on the schedule in the plan, and with the right amount, intensity and variety so it keeps its value.

    Example: Positive: Mia says "car" and right away gets the toy car for 30 seconds. Negative: once Mia finishes three tracing items she gets a short break from the work, and finishing work becomes more likely.

    Exam trap: Negative reinforcement is not punishment: "negative" means something is taken away, and reinforcement always increases behavior.

    Learn it with our free interactive page

  • C.2Implement procedures to establish and use conditioned reinforcers

    A conditioned reinforcer is something that wasn't reinforcing at first but became reinforcing by being paired with things that already are. Praise, tokens, stickers and even the RBT can become conditioned reinforcers. Unconditioned reinforcers, like food, water and warmth, need no learning.

    Example: Each time the RBT hands Ben a piece of his favorite snack, she says "Great job!" just before (or as) she hands it over. After many pairings, praise alone starts to increase his behavior.

    Exam trap: Tokens and money are generalized conditioned reinforcers because they are backed by many other reinforcers, not unconditioned ones.

  • C.3Implement discrete-trial teaching procedures

    Discrete-trial teaching (DTT) teaches a skill through short, repeated trials. Each trial has an instruction (the SD), a prompt if needed, the learner's response, a consequence (reinforcement or error correction), and a short pause before the next trial (the intertrial interval).

    Example: The RBT lays out three picture cards and says "Touch dog." Aiden touches the dog, gets praise and a token, and after a 3-second pause the next trial starts.

    Exam trap: Know the order: SD, prompt if needed, response, consequence, intertrial interval; DTT is structured and adult-led, unlike naturalistic teaching.

  • C.4Implement naturalistic teaching procedures (e.g., incidental teaching, natural environment training)

    Naturalistic teaching happens inside everyday routines and play, follows what the learner is interested in right now, and uses natural reinforcers, usually the item or activity the learner wanted. Because teaching happens in real settings, skills tend to generalize better.

    Example: At snack, Lily reaches for the juice. The RBT holds it, waits, prompts "juice," and when Lily says "juice" she gets the juice.

    Exam trap: In naturalistic teaching the reinforcer is tied to the response (asking for juice gets juice), not an unrelated token or treat chosen by the adult.

  • C.5Implement task analyzed chaining procedures (e.g., forward, backward, total task)

    A task analysis breaks a complex skill into small steps in order. Forward chaining teaches the first step first and adds steps in order; backward chaining teaches the last step first, so the learner always finishes the task; total-task chaining teaches every step on every attempt, prompting where needed.

    Example: For a 7-step handwashing routine taught with backward chaining, the RBT prompts Omar through steps 1 to 6 and teaches step 7, drying his hands, until he does it alone, then moves on to step 6.

    Exam trap: Backward chaining means the last step is taught first, not that the steps are done in reverse order; the learner still completes them in the normal order.

    Learn it with our free interactive page

  • C.6Implement discrimination training

    Discrimination training teaches the learner to respond when one stimulus is present (the SD) and not when others are present (S-deltas). The response is reinforced only in the presence of the SD, so the behavior comes under stimulus control.

    Example: With a dog, a cat and a car card on the table, the RBT says "Touch dog" and reinforces only touching the dog card; touching the cat card earns nothing.

    Exam trap: An SD signals that reinforcement is available for the response, while an S-delta signals that it is not.

  • C.7Implement procedures using stimulus and response prompts that include appropriate fading procedures

    Prompts are extra help that makes a correct response more likely. Response prompts come from a person (physical guidance, a model, a gesture, a verbal hint); stimulus prompts change the materials (position, size, color, highlighting). Fading methods include errorless teaching (start with enough help to prevent errors, often most-to-least), least-to-most (more help only if needed), stimulus fading (slowly remove the change to the materials) and time delay (prompt right after the instruction at first, then wait a few seconds before prompting, a fixed wait or one that grows, so the learner can answer before the prompt).

    Example: Teaching Zoe to write her name, the RBT starts with hand-over-hand guidance, then a light touch at the wrist, then only pointing, then no help.

    Exam trap: A model or a gesture is a response prompt, while a bigger or highlighted card is a stimulus prompt; and prompts left in place too long cause prompt dependence.

    Learn it with our free interactive page

  • C.8Implement generalization procedures

    Generalization means a skill shows up beyond the exact teaching situation: across settings, people and materials. You plan for it by teaching with several examples, different people and places, and natural reinforcers, instead of hoping it happens on its own.

    Example: Ryan learned to say "cup" with one red plastic cup at the table. The RBT now uses mugs, paper cups and glasses, practices in the kitchen, and has his mother ask too.

    Exam trap: Generalization is about new people, places and materials, while maintenance is about the skill lasting over time.

  • C.9Distinguish between maintenance and acquisition procedures

    Acquisition procedures teach a skill the learner doesn't have yet, so they use more prompting, frequent practice and dense reinforcement. Maintenance procedures keep a skill the learner has already mastered, so they use occasional practice or probes, thinner reinforcement and little or no prompting.

    Example: Naming colors is mastered, so the RBT now checks it a few times a week with praise on a thinner schedule, while daily, richly reinforced trials go to the new target, naming shapes.

    Exam trap: Mastered targets move to maintenance; they are not simply dropped from the program.

  • C.10Implement shaping procedures

    Shaping teaches a new behavior by reinforcing closer and closer approximations of the target and no longer reinforcing the earlier, less accurate forms. It's used when the learner can't yet do the full behavior at all.

    Example: To teach "ball," the RBT first reinforces "b," then only "ba," then only "ball."

    Exam trap: Shaping changes one behavior step by step, while chaining links several separate behaviors into a sequence.

    Learn it with our free interactive page

  • C.11Implement token economies

    In a token economy the learner earns tokens (stars, chips, checkmarks) for target behaviors and later trades them for backup reinforcers at a set exchange rate. Tokens are generalized conditioned reinforcers, so they bridge the wait between the behavior and the backup reinforcer.

    Example: Kai earns a star for each puzzle he finishes, and 5 stars buy 3 minutes of tablet time.

    Exam trap: Taking tokens away for problem behavior is response cost, a form of negative punishment, and is only used when the plan includes it.

Test this area: try free Behavior Acquisition questions, or take the 10-question check to see how you do across all 6 areas.

Area D · 7 tasks · 14 scored questions

D. Behavior Reduction

Procedures that reduce problem behavior, starting from why the behavior happens. Expect scenarios that ask for the function of a behavior, the right differential reinforcement or extinction procedure, or which side effect is showing up.

  • D.1Identify common functions of behavior

    The function is the reason a behavior keeps happening: what it gets the person, or what it gets them out of. The common functions are attention, access to tangibles (items or activities), escape or avoidance of something unpleasant such as a task, and automatic (sensory) reinforcement that doesn't depend on other people.

    Example: Every time the RBT says "time to work," Ella drops to the floor and the task gets put away, so her behavior is probably maintained by escape.

    Exam trap: Function depends on what follows the behavior, not what it looks like: two learners can both hit for different reasons.

    Learn it with our free interactive page

  • D.2Implement antecedent interventions (e.g., NCR, high-probability request sequences, demand fading)

    Antecedent interventions change what happens before the behavior so it is less likely to start. Noncontingent reinforcement (NCR) delivers the reinforcer on a time schedule no matter what the learner is doing; a high-probability request sequence gives a few easy requests the learner reliably follows right before a harder one; demand fading lowers demands for a while, then raises them gradually.

    Example: Ava yells to get attention, so the plan has the RBT give her attention every 2 minutes whether or not she has yelled (NCR).

    Exam trap: NCR is delivered by the clock regardless of behavior, while DRO is earned only when the problem behavior hasn't happened for the interval.

    Learn it with our free interactive page

  • D.3Implement differential reinforcement procedures (e.g., DRO, DRA, DRI, DRL, FCT)

    Differential reinforcement reinforces some responses and withholds reinforcement from others: an alternative behavior, the absence of the problem behavior, or a lower rate of it. DRA reinforces a specific alternative behavior; DRI reinforces a behavior that physically can't happen at the same time as the problem behavior; DRO reinforces the absence of the problem behavior for a set time; DRL reinforces a lower rate of a behavior that's fine in small amounts; FCT teaches a communication response that earns the same reinforcer the problem behavior did.

    Example: Leo throws materials to get out of work, so the RBT teaches him to hand over a "break" card, which earns a 1-minute break (FCT).

    Exam trap: DRI is a kind of DRA in which the replacement can't physically happen alongside the problem behavior (hands in pockets instead of hand flapping), while plain DRA only needs a better alternative.

    Learn it with our free interactive page

  • D.4Implement extinction procedures

    Extinction means the reinforcer that kept a behavior going no longer follows it, so the behavior stops paying off. It has to match the function: no attention for attention-maintained behavior, the task stays for escape-maintained behavior, and no item for behavior maintained by access to tangibles. For automatically maintained behavior, sensory extinction blocks or masks the sensory result.

    Example: Jake whines to get out of handwriting practice, so under escape extinction the RBT keeps the worksheet in front of him and the task continues until it's done.

    Exam trap: Ignoring is extinction only for attention-maintained behavior; ignoring escape-maintained behavior while the task is taken away still reinforces it.

    Learn it with our free interactive page

  • D.5Implement positive and negative punishment procedures (e.g., time-out)

    Punishment is a consequence that makes a behavior less likely in the future. Positive punishment adds something, such as a reprimand or overcorrection; negative punishment removes something the learner values, as in response cost or time-out from positive reinforcement. An RBT uses punishment only when it is written into the behavior plan and the supervisor has verified they can carry it out correctly.

    Example: The plan says Mason loses one token each time he spits (response cost), and over the next week spitting drops: that's negative punishment.

    Exam trap: Negative punishment removes something good to decrease behavior, while negative reinforcement removes something unpleasant to increase behavior.

  • D.6Describe secondary effects of extinction and punishment

    Extinction can bring an extinction burst (the behavior briefly gets more frequent, longer or more intense), response variation (new behaviors appear), resurgence (an older behavior that used to work comes back) and emotional responding such as crying or aggression. Punishment can bring emotional responses and escape or avoidance of the person or place linked to it.

    Example: On the first day crying no longer earns the tablet, Nora cries louder and longer than ever: an extinction burst. Giving in now would teach her that louder crying works.

    Exam trap: Resurgence is an older behavior returning when a newer one stops being reinforced, while spontaneous recovery is the same behavior briefly returning after it had stopped.

    Learn it with our free interactive page

  • D.7Implement crisis/emergency procedures

    When a client or anyone else is in danger, follow the client's crisis plan and your organization's protocol, using only the procedures you have been trained and authorized to use. Keep everyone safe, get help or call emergency services if needed, then tell your supervisor and document what happened promptly.

    Example: Owen starts banging his head on the floor. The RBT follows his crisis plan: moves the other children away, blocks with a cushion as trained, and reports to the BCBA and writes an incident report the same day.

    Exam trap: Don't improvise a physical hold or restraint you weren't trained on, even in an emergency; follow the written protocol.

Test this area: try free Behavior Reduction questions, or take the 10-question check to see how you do across all 6 areas.

Area E · 4 tasks · 10 scored questions

E. Documentation and Reporting

What you report, to whom and how fast, and how you write session notes. The right answer usually tells the supervisor promptly and sticks to objective facts.

  • E.1Share concerns and suggestions from caregivers, teachers and other providers with your supervisor promptly

    Caregivers, teachers and other providers often tell the RBT things first. Pass their concerns and suggestions on to your supervisor promptly, instead of acting on them yourself or letting them wait.

    Example: A teacher mentions that Lucas has started hitting at recess, and the RBT tells the BCBA that day rather than waiting for next week's supervision meeting.

    Exam trap: When a parent asks to change a goal or a procedure, the RBT passes the request to the supervisor instead of changing it or answering it themselves.

  • E.2Seek and prioritize clinical direction from a supervisor in a timely manner

    Ask your supervisor for direction as soon as you need it: when you need training on a procedure, when the data look odd, or when something isn't working. Follow the chain of command, starting with your supervisor; if the problem involves the supervisor, go to their manager or another appropriate person.

    Example: The learner's correct responses drop from 90% to 20% after a new program starts, so the RBT contacts the BCBA instead of changing the prompting on her own.

    Exam trap: When something is urgent or unclear, the answer is to contact the supervisor now, not to wait, guess, or ask another RBT what to do.

  • E.3Report/document variables that might affect client progress in a timely manner

    Tell your supervisor quickly about anything that could change how the learner performs, such as illness, a new medication, poor sleep, schedule changes or big family events, and record it in your notes.

    Example: At drop-off a parent mentions that Sophie started a new medication yesterday. The RBT writes it in the session note and lets the BCBA know the same day.

    Exam trap: Waiting until the next supervision meeting to mention a medication change is too late.

  • E.4Communicate objectively what happened in a session, following legal, regulatory and workplace rules

    Whether you write a session note or tell a caregiver or your supervisor how the session went, describe what happened in observable terms: what was worked on, what the learner did and what you did. Write notes promptly and accurately, in the format your employer, the funder and the law require, and never back-date them or change them to look better.

    Example: "Client cried and dropped to the floor 3 times during the matching task; each episode lasted under 1 minute" is objective. "Client was in a bad mood and didn't want to work" is not.

    Exam trap: Feelings, guesses and labels (angry, lazy, manipulative) don't belong in a session note or a verbal report; say what you saw and heard.

Test this area: try free Documentation and Reporting questions, or take the 10-question check to see how you do across all 6 areas.

Area F · 10 tasks · 11 scored questions

F. Ethics

The RBT Ethics Code (2.0) and the supervision rules applied to real situations: gifts, social media, multiple relationships, confidentiality and staying inside your role. The right answer usually protects the client and goes through the supervisor.

  • F.1Identify and apply core principles underlying the BACB's ethics code for RBT certificants

    The RBT Ethics Code rests on four core principles: benefit others; treat others with compassion, dignity and respect; behave with integrity; and ensure your own competence. When no specific rule covers a situation, pick the action that best fits these principles, with your supervisor's help.

    Example: A parent asks the RBT to write that a session lasted 2 hours when it lasted 1.5. Behaving with integrity means saying no and telling the supervisor.

    Exam trap: When two answers both sound reasonable, the better one puts the client's interest first and keeps you honest and inside your role.

  • F.2Provide behavioral technician services only after demonstrating competence

    You deliver a service only after your supervisor has confirmed you can do it correctly, starting with the Initial Competency Assessment before certification and continuing with ongoing checks. If you're asked to do something you haven't been trained on, tell your supervisor right away and document that you did.

    Example: The BCBA asks the RBT to start a toilet-training protocol tomorrow, but she has never been trained on it, so she tells the BCBA and asks for training before running it.

    Exam trap: Being certified doesn't make you competent in every procedure; a new intervention or a new client population needs training first.

    Learn it with our free interactive page

  • F.3Provide services only under ongoing supervision from supervisors who meet BACB requirements

    An RBT never practices independently. Supervision must cover at least 5% of your service hours each calendar month, with at least two real-time contacts (not phone or email), at least one of them individual, and your supervisor must watch you work with a client in at least one. Supervisors are BCBAs or BCaBAs who have completed the BACB's supervisor training.

    Example: Andre works 100 hours with clients in March, so he needs at least 5 hours of supervision that month, including at least one contact where the BCBA observes him in session.

    Exam trap: Supervision by phone or email doesn't count, and an RBT can't be the employer of, related to, superior to, or in a personal or business relationship with their supervisor (paying for supervision doesn't make you the employer).

  • F.4Identify effective supervision practices

    Good supervision uses behavioral skills training: instructions, modeling, rehearsal and feedback, repeated until you can do the skill correctly. It also includes your supervisor observing you with clients and reviewing your data and notes.

    Example: To teach a new prompting procedure, the BCBA explains the steps, models them with the learner, has the RBT practice while she watches, then gives specific praise and corrections.

    Exam trap: Reading a protocol or watching a video on your own isn't behavioral skills training; it also needs rehearsal and feedback.

  • F.5Identify and comply with requirements for collecting, using, storing, protecting, and disclosing confidential information

    Client information is private. Collect and share only what the job needs, keep records secure, follow privacy laws (such as HIPAA in the US) and your employer's rules, and discuss client details only under your supervisor's direction unless the law allows it, for example to prevent harm.

    Example: A neighbor asks the RBT at the grocery store how "the little boy you work with" is doing, and the RBT doesn't confirm she works with him or share any details.

    Exam trap: Even confirming that someone is a client discloses confidential information.

  • F.6Identify and comply with requirements for making public statements about professional activities

    Public statements include social media, websites, resumes and anything you say publicly about your work. Never share identifying client information (photos, videos, written details) on social media or websites, and don't misrepresent your credentials, what behavior analysis can do, or the results of services.

    Example: An RBT wants to post a photo from session to celebrate a learner's first words, with no name attached. She doesn't, because a photo of a client is identifying information with or without a name.

    Exam trap: An RBT is not a behavior analyst or a BCBA, so calling yourself one, or promising a family a "cure," misrepresents your credentials and the outcomes.

  • F.7Spot multiple relationships, know their risks, and reduce the risk when one is unavoidable

    A multiple relationship is a second relationship with a client, family member, coworker or supervisor on top of the professional one, such as friend, babysitter, relative or business partner. It can cloud judgment and harm the client. Avoid them; if one develops, tell your supervisor right away, work to resolve it and document it (if it involves your supervisor, tell their manager or another appropriate person).

    Example: A client's mother asks the RBT to babysit her other children on weekends for extra money. The RBT politely declines and tells her supervisor about the offer.

    Exam trap: Bumping into a client's family in public isn't a multiple relationship. A real one that can't be avoided, such as a client's parent who is also your child's teacher in a small town, still has to be reported to your supervisor, kept professional and documented.

  • F.8Follow the RBT Ethics Code rules on giving and receiving gifts

    RBTs don't give or accept gifts worth more than $10 (US) with clients, stakeholders or supervisors. A small gift is fine as an occasional thank-you that brings no financial benefit, but small gifts that become regular can still break the rule, and a stricter employer policy comes first.

    Example: At the end of the school year a parent offers the RBT a $25 gift card. She thanks the parent and declines, explaining the $10 limit.

    Exam trap: The $10 limit applies to holiday and goodbye gifts too, and it covers gifts you give as well as gifts you receive.

  • F.9Identify and apply interpersonal and professional skills when representing oneself as an RBT

    Act professionally with everyone you work with: accept feedback without getting defensive and act on it, listen actively, ask others for their input, and collaborate with families, teachers and other professionals.

    Example: After the BCBA points out that the RBT's praise comes too late, the RBT thanks her, asks how to time it better, and fixes it in the next session.

    Exam trap: The best response to feedback is to use it and improve, not to explain why you did it your way.

  • F.10Engage in ongoing cultural humility and responsiveness in service delivery and professional relationships

    Cultural humility means noticing your own biases, learning about each family's values, language and routines instead of assuming, and working with your supervisor so services fit the family. It's ongoing, not a one-time training.

    Example: A family tells the RBT they eat with their hands at home and don't want utensil use taught at every meal. The RBT respects this, notes it, and brings it to the BCBA so the goal can be discussed.

    Exam trap: Adapting services to a family's culture goes through your supervisor; the RBT doesn't change goals on their own, even for good reasons.

Test this area: try free Ethics questions, or take the 10-question check to see how you do across all 6 areas.

Our take

How to use this guide

  1. Find your weakest area first. The free 10-question check scores each area. Reading A.1 to F.10 in order spends as much time on what you know as on what you don't.
  2. Read that area's tasks and say each example back in your own words. If you can't give your own example, you don't know the task yet. The free RBT flashcards put every task on a card you can flip.
  3. Learn the exam traps. Many questions describe a short session and ask which procedure, measure or function it is, and the wrong answers are the near neighbors listed in the traps above.
  4. Weight your time by the question counts. Behavior Acquisition and Behavior Reduction together are 33 of the 75 scored questions.
  5. Finish with a full timed run. The free 85-question mock exam runs on a 90-minute timer and explains every answer. Review every miss, not just the score.

Want the exam facts too? Pass rates, scoring and retake rules are on Is the RBT exam hard?

RBT study guide FAQ

What is on the RBT exam in 2026?

85 multiple-choice questions (75 scored, 10 unscored) in 90 minutes, built on the BACB's RBT Test Content Outline, 3rd edition, which every exam has used since January 1, 2026. The 75 scored questions are split across 6 areas: Data Collection and Graphing (13), Behavior Assessment (8), Behavior Acquisition (19), Behavior Reduction (14), Documentation and Reporting (10), Ethics (11).

How many tasks are on the RBT task list?

43 tasks in 6 content areas in the 3rd edition, the version used for every exam since January 1, 2026. The 2nd edition RBT Task List, used before 2026, had 37 tasks under different area names, such as Measurement and Skill Acquisition.

Is the RBT task list the same as the Test Content Outline?

For the current exam, yes. The BACB called the 2nd edition document the "RBT Task List" and calls the 3rd edition the "RBT Test Content Outline". Most people still say "task list" for both, but only the 3rd edition matches the exam you will take.

Which RBT content area has the most questions?

Behavior Acquisition, with 19 of the 75 scored questions. Behavior Reduction is next with 14, then Data Collection and Graphing with 13. Behavior Assessment is the smallest with 8.

Is an older RBT study guide still useful?

Partly. Guides written before 2026 follow the 2nd edition task list, so they use old area names and miss newer tasks such as summarizing data, reading trends in graphs, punishment and its side effects, and the expanded Ethics area. Use them for the basics, and check every topic against the 3rd edition areas.

How should I study for the RBT exam?

Find your weakest area first, then study the tasks in that area in plain words with your own examples, then practice scenario questions, because many questions describe a session and ask which procedure or measure it is. Finish with a full timed run of 85 questions in 90 minutes before you book.

Free RBT practice

10-question RBT check, 85-question mock exam, RBT flashcards, functions of behavior, differential reinforcement, interval recording, schedules of reinforcement, extinction burst, prompt hierarchy, chaining and task analysis and the RBT competency assessment.

QuizPrep is an independent study tool, not affiliated with or endorsed by the BACB. Spotted something that's off? Email quizprepinfo@gmail.com.